WILSON GLOBAL INVEST

WILSON GLOBAL INVEST is proud to present the new range of semiautomatic solder hydraulic stamping machines to meet the needs of the small and medium sizad businesses to make blisters packs. Sealing and stamping the thermosealing plates simultaneously, (with the quantity and form of alveolus necessary) of PVC or PET-G with thermosealing complexes like PVC, PET-G, cardboard, paper, aluminium, etc.

Download this product catalog

OPERATION

  • Set general switch and temperature selector to I, setting the temperature required on the termperature selector and adjusting the soldering time on the timer.
  • Wait approximately 15 minutes for he soldering plate to reach its working temperature 120º -150ºC.
  • Position the welding-die implement on the sliding cart.
  • Fit the alveolus plate, (plates of 500×700 mm., max) on the sliding carriage.
  • Load the articles to be packed into the cells.
  • Place over the alveolus plate, the sealing material, cutting it from the reel with a sliding blade (there is device to prevent the sealing material from moving back).
  • Press the two buttons simultaneously.
  • The card is automatically posicioned under the heating squeezer board, the board comes down, die-cutting and welding simultaneously, and once the desired period of time has elapsed, the board rises and the cart moves to the initial position.
  • Remove the finished blisters an the off-cut.

TECHNICAL SPECIFICATIONS

  • Autonomous hydraulic group 2,2 kW (regulation amount 50 to 200 kgr/cm2)
  • Air comsuption 9,1 Nl/cycle. at 6 bar.
  • Heating plates fitted with thermostat 4,2 kW.
  • Power supply 3 PH+N+E 380 V, 50/60 Hz.
  • Sealing-Stamping surface 500 x 700 mm.
  • Maximum blister depth 150 mm.
  • Maximum sealing-stamping pressure 60 Tm
  • Sealing-Stamping time 4 a 6 seconds.
  • Approximate time of each cycle 10 to 45 seconds.
  • Dimensions: 2,04m. H. 1,18 (1,61)m. Widght, 0,96m. Depth
  • Weight  960 kg.