MA 35X50

WILSON GLOBAL INVEST

WILSON GLOBAL INVEST offers its MSA semiautomatic thermoforming system to meet the production requirements for medium and short series of thermoformed, die cut plastic sheets.

Its ease of use makes it the best choice for coupling to a blister packer, with welding/cutting by high frequency or heat; also for hydraulic or roller die cutters.

PRODUCTIÓN PROCESS

 The film is automatically fed from the reel into the moulding area, where the swinging frame holds the film to to the table. The heating chamber advances until it is above the film and, once the plastic has reached the required temperature, then withdraws. The mould ascends and the plug-mould gets down, vacuum being effected through the mould.

The plug-moulds ascends when the film is shaped. It is then cooled by means of an electrofan and the mould cooling plate. When cold, air is blown through the mould to free it.

 Mould descends, the frame releases the moulded sheet which is then picked by clamps above a conveyor belt.

Next, a blade coupled to the chamber splits the moulded item from the film, the clamps open and place the item onto the conveyor, which takes it outside the machine.